Product ID:CELLULOSE ACETATE BUTYRATE 551-0.01, SPC 19347
MSDS Date:04/22/1994
FSC:6810
NIIN:00N000962
MSDS Number: BCGSK

EASTMAN CHEMICAL CO

WILCOX DR & LINCOLN ST
KINGSPORT, TN 37662
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 615-229-2000

Cage: 78364

EASTMAN CHEM PRODUCTS A SUB OF EASTMAN KODAK CO

KINGSPORT, TN 37662 US

Telephone: 423-229-2000

Cage: 74364

CIRCUMSTANCES SUCH AS POORLY VENTILATED SPACES,

RTECS: 9999999ZZ

CELLULOSE ACETATE BUTYRATE

CAS: 9004-36-8

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

SUPPLEMENTARY LOCAL EXHAUST VENT, CLOSED SYSTEMS OR

RTECS: 9999999ZZ

LD50 LC50 Mixture:LD50: (ORAL, RAT) >6400 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION/EYES/SKIN: LOW HAZARD FOR
USUAL INDUSTRIAL HANDLING OR COMMERCIAL HANDLING BY TRAINED
PERSONNEL. MOLTEN MATERIAL WILL PRODUCE THERMAL BURNS. INGESTION:
EXPECTED TO BE A LOW INGESTION HAZARD .
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMED . INHAL:MOVE TO FRESH AIR. GET MED ATTN
IF SYMPS PERSIST. EYES:WASH OUT IMMED W/WATER FOR AT LEAST 15 MIN.
GET MED ATTN IF SYMPS PERSIST. SKIN: WASH W/SOAP & WATER. GET MED
ATTN IF SYMPS OCCUR. IF BURNED BY CNTCTW/MOLTEN MATL, COOL AS
QUICKLY AS POSS. DO NOT PEEL MATL FROM SKIN. GET MED ATTN. NOTE TO
MD: BURNS SHOULD BE TREATED AS THERMAL BURNS. MATL WILL COME
(SUPDAT)

Extinguishing Media:WATER SPRAY, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:POWDERED MATL MAY FORM EXPLO DUST-AIR
MIXS. MIXING OF ORG SOLIDS (SUCH AS CELLULOSE ESTERS) IN NONPOLAR
HYDROCARB (SUCH AS HEPTANE/TOLUENE) MAY RSLT IN (SUPDAT)

Spill Release Procedures:SWEEP OR SCOOP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPEC PRECAUTIONARY MEASURES SHOULD
BE NEEDED UNDER ANTIC CNDTNS OF USE. KEEP CNTNR CLSD. CAUTION:FOR
MFG, PROCESSING OR REPACKING BY TRAINED PERS.
Other Precautions:KEEP FROM CNTCT W/OXIDIZING MATLS. MINIMIZE DUST
GENERATION & ACCUM. REFER TO NFPA PAMPHLET NO 654, "PREVENTION OF
FIRE & DUST EXPLO IN CHEM, DYE, PHARMACEUTICAL & PLASTICS
INDUSTRIES." RECOM PRACT WH EN ADDING ORG SOLIDS (SUCH AS (SUPDAT)

Respiratory Protection:IF ENGINEERING CONTROLS DO NOT MAINTAIN AIRBORNE
CONCS TO ACCEPTABLE LEVEL, NIOSH/MSHA APPRVD RESP MUST BE WORN.
RESP TYPE:DUST. IF RESPS ARE USED, PROGRAM SHOULD BE INSTITUTED TO
ASSURE COMPLIANCE WI TH OSHA STANDARD 29 CFR 1910.134.
Ventilation:GOOD GEN VENT (TYPICALLY 10 AIR CHANGES PER HR) SHOULD BE
USED. VENT RATES SHOULD BE MATCHED TO CONDITIONS. (ING 2)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EYE BATH, WASHING FACILITIES.
Work Hygienic Practices:IT IS GOOD INDUS HYGIENE PRACT TO MINIMIZE SKIN
CNTCT. WHEN MATL IS HEATED, WEAR GLOVES TO PROT AGAINST THERMAL
BURNS.
Supplemental Safety and Health
SPEC GRAV:1.16-1.26 (H*2O=1). EXPLO HAZ:BUILDUP OF STATIC ELEC; CAN
CAUSE FLASH FIRE/EXPLO. FIRST AID PROC:OFF AS HEALING OCCURS;
THEREFORE, IMMED REMOVAL FROM SKIN IS NOT NEC. OTHER
PRECS:CELLULOSE E STERS) TO ANY FLAM LIQ THAT INERT GAS ATM BE
MAINTAINED W/IN VESSEL. REFER TO NFPA PAMPHLET NO 69, EXPLO PVNTION
SYS."

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>261F,>127C
Vapor Pres:NEGLIGIBLE
Spec Gravity:SUPDAT
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE SOLID (POWDER); SLIGHT, CHARACTERISTIC ODOR.

Stability Indicator/Materials to Avoid:YES
MATERIAL CAN REACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HAZARDOUS COMBUSTION PRODUCTS: CARBON
DIOXIDE, CARBON MONOXIDE.

Waste Disposal Methods:DISCHARGE, TREATMENT OR DISPOSAL MAY BE SUBJECT
TO NATIONAL, STATE AND LOCAL LAWS. INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.